Do you want to connect your Sceptre Android TV to Wi-Fi? Installing apps, accessing access to content, and streaming your favorite videos are all possible with an internet connection. So, how do you get your Sceptre Android TV connected to a Wi-Fi network? There are two ways. The first step during the guided setup is to connect to the network.
If you don’t have a Wi-Fi network when you start, you may skip this step and complete it later in the settings menu. We’ll show you how to connect your Sceptre TV to a Wi-Fi network step by step below. We’ll also look at any issues that arise during the process, what causes them, and how to fix them.
Is It Possible To Connect Sceptre Android TV To Wi-Fi?
Well, Is Sceptre TV a Smart TV that will connect without a hitch, or will you have to purchase a streaming device? Smart and non-Smart TVs are available from the brand. Sceptre Android TVs are all Smart models with various apps and the ability to connect to a Wi-Fi network directly. As a result, you won’t need to purchase a streaming device to connect to the Internet (such as an Android TV box).
How To Connect A Sceptre Android TV To Wi-Fi?
After unpacking your device, one way to connect your TV to Wi-Fi is during the first setup. When prompted to add a Wi-Fi network, follow the on-screen instructions. Then, using the remote, select your network SSID name from the available lists and enter your password. After adding the network, you can finish the setup and start streaming shows. What if, on the other hand, you skipped this step? You may still connect to Wi-Fi using the network settings on your TV. Here’s how to go about doing it:
1 – From your home screen, navigate to the Settings icon located on the top right corner of the TV screen.
2 – Under Settings, select Network & Internet and make sure the Wi-Fi option is activated (using the slider button)
3 – Under available Wi-Fi networks, scroll down and choose your network. You’ll be prompted to enter a password.
4 – Enter your password using the remote and then click okay. The TV will connect to the Wi-Fi automatically, and you can immediately start streaming.
Without A Remote, How To Connect Sceptre Android TV To Wi-Fi?
Well, When connecting your Sceptre TV to a remote, it would be easier to navigate the settings menu and enter the password if you had a remote control. But what happens if your remote is misplaced or damaged? What options do you have? There are a few options, to be sure. They are as follows:
1. Using Smartphone As A Remote
Sceptre Android TV will allow you to set up the device with the help of your smartphone. This option allows you to connect to a Wi-Fi network without using a remote. In addition, some TV types may be compatible with the TV remote control apps on your smartphone, removing the requirement for a smart TV entirely.
2. Using Mouse Pad
Well, Some Smart TV models will support mouse pads through USB ports. You can try this option, but keep in mind that some models may not be compatible. If it works, the mouse will navigate you through the menu options in the same way as a remote would.
3. Using An Ethernet Port To Connect To The Internet
Have you run out of options for connecting to a Wi-Fi network? You may still use your Sceptre TV to access the Internet by connecting to a LAN network. The rear panel of the brand’s smart TVs has an RJ45 port where you may plug in your Ethernet cable.
Sceptre TV Not Connecting To Wi-Fi? What’s The Cause?
Well, Connecting your Sceptre Android TV to a Wi-Fi network appears to be straightforward; however, it may present some difficulties. You may discover that your Smart TV is unable to connect to the Wi-Fi network for various reasons. They are as follows:
1 – Weak wireless signal
2 – Wrong password details
3 – Software glitches on the TV or router
4 – Corrupted settings after firmware update
5 – Faulty network settings
6 – Firewall settings
Troubleshooting – Sceptre TV Is Not Connecting To Wi-Fi?
If your Sceptre TV doesn’t connect to Wi-Fi, try the solutions below to fix the issue.
1. Check The Wi-Fi Signal Is Strong
One of the first things to check is your router’s wireless signal. For a connection to be successful, it must be strong enough. Next, check the network bar strength where your Wi-Fi appears in the list of accessible networks to get a sense of the network strength. Also, If some bars are missing, the network is unreliable, or something interferes with the signal. As a result, until the network is strong enough, you should relocate your router closer to the TV.
2. Make Sure You’re Entering The Correct Password Details
Wrong password details are among the most common causes of Wi-Fi network failure. Check your router settings to ensure you’ve got the right password, then try again.
3. Forget Wi-Fi Network
Minor glitches or damaged settings might hamper the Wi-Fi connection procedure. For example, you might start by forgetting about the Wi-Fi network before moving on to other troubleshooting procedures. This clears to fix the issue by helping any network settings saved. To forget the network:
1 – Go to the list of available networks and select the Wi-Fi network you’re attempting to connect to.
2 – Select “Forget network” from the options that appear as you scroll down the page.
3 – Return to the list of possible connections and attempt connecting once more.
4. Reboot TV
If forgetting the network does not work, try rebooting or resetting your TV. This clears the saved memory, which can aid in the removal of damaged settings and system bugs. You can restart the device by unplugging it from the power outlet and waiting 30 seconds. After that, re-plug it in and turn it on. If the issue persists, click Settings > Advanced Settings > Factory Reset and do a factory reset. A factory reset erases all settings and preserves data; therefore, it should only be used as a last option.
5. Reboot Router
The router may be the cause of your TV not connecting to Wi-Fi. This might be due to various factors, including incorrect settings or software glitches. One of the most effective ways to fix these difficulties is to reboot the router.
A hard reset button is usually found on the rear panel of most routers. The reboot procedure is initiated by pressing and holding the button. You may also execute a cold reboot by unplugging the router from the outlet, waiting a minute, then putting it back in and turning it on.
Also, Check:
- Hisense Smart TV Troubleshooting
- Program Magnavox Universal Remote
- Vizio TV Troubleshooting
The Bottom Line: Connect Sceptre Android TV To Wi-Fi
Well, Connecting your Sceptre Android TV to Wi-Fi is a quick and easy operation that offers you access to a wealth of online content. If you’ve recently purchased a TV or want to connect for the first time, the information provided above will help.
In this case, the solutions listed above can fix you in troubleshooting and resolving the issue. In the odd case that you are unable, there are various options. The first option is connecting through Ethernet or moving to another Wi-Fi network. If this does not work the issue, you should contact Sceptre Customer Support for more assistance.